I’m so happy with the results of yesterday’s epoxy session. No voids, bubbles, drips or dinkleberries to sand off for a change! :-)I think this is the best work I’ve done so far and despite Jimmy (Sticky Fingers) poking at it the results are near perfe…
Archive | She:Kon RSS feed for this section
7 1/2 hours to do 4 hours work
but that’s Ok! It was nice having company in the shed today. My buddy Jim (Sticky Fingers) Campbell came over to help out with the epoxy job.Jimmy’s the curious type of guy who’s gotta see if sticky epoxy is still sticky! 
That’s Ok too! I’m sure we…
7 1/2 hours to do 4 hours work
but that’s Ok! It was nice having company in the shed today. My buddy Jim (Sticky Fingers) Campbell came over to help out with the epoxy job.Jimmy’s the curious type of guy who’s gotta see if sticky epoxy is still sticky! That’s Ok too! I’m sure we…
Mission Sandinsanity Continues
This mornings task was to continue the sanding from where I left off yesterday. The 12 oz fiberglass leaves a pretty prominent and hard edge that has to be sanded smooth for a couple of reasons. First is to prevent voids appearing when the new glass br…
Mission Sandinsanity Continues
This mornings task was to continue the sanding from where I left off yesterday. The 12 oz fiberglass leaves a pretty prominent and hard edge that has to be sanded smooth for a couple of reasons. First is to prevent voids appearing when the new glass br…
My Get UP and GO…..
Got Up and Went! ;-)Four hours of sanding and I couldn’t do it anymore. This new epoxy is hard as rock in 48 hrs. That’s the hardest stuff I’ve had to sand so far! I guess that’s a good thing though.The plan was to feather the fabric edges from t…
My Get UP and GO…..
Got Up and Went! ;-)Four hours of sanding and I couldn’t do it anymore. This new epoxy is hard as rock in 48 hrs. That’s the hardest stuff I’ve had to sand so far! I guess that’s a good thing though.The plan was to feather the fabric edges from t…
Results are in and………..
it looks like my work yesterday turned out Ok!There are a few spots where I could have squeegeed a bit more but they were hard to reach from the step ladder. As it was I managed to epoxy glue my t-shirt to my belly hairs! 😉 It looks like all of …
Results are in and………..
it looks like my work yesterday turned out Ok!There are a few spots where I could have squeegeed a bit more but they were hard to reach from the step ladder. As it was I managed to epoxy glue my t-shirt to my belly hairs! 😉 It looks like all of …
Another marathon session
with epoxy & fiberglass. 8 Hours, 3 1/2 gallons of epoxy, 24 yds of 12 oz 0/90 biaxial fiberglass, two roller sleeves, 6 pairs of nitril gloves and a few energy drinks!I laid out the fiberglass yesterday but knew I’d need more time than I had left …
