Greetings all! All is going fine with the construction of our new boat. Surprises can still happen, but we’re on track to take delivery of the boat sometime before this coming summer. Our cruising plans We now know our cruising plans! Or, at least w…
Tag Archives | Nordhavn
Spitfire Arraow the World
When we first started planning our boat trip around the world, we expected that cruising internationally with our cat Spitfire would limit the countries we could visit, because we did not want to subject him to lengthy quarantines. In reality, the French territory of New Caledonia was the only destination that we opted not to…
NEW BOAT NOW IN OUR LIVES
The purchase of our new boat has now been finalised and we take over ownership in the next few days.While Envoy, as a full displacement vessel, was perfect for the Med, we never intended to buy such a vessel here. Instead we have been looking at planin…
Fuel Cooling
On arriving into Nuku Hiva in the Marquesas Islands in 2013, the fuel temperature in our supply tank had climbed to 180F (82C). What was happening is the engine circulates about 50 gallons per hour and yet only burns a tiny fraction of that. Most of this fuel flows through the engine fuel system and…
Maretron Firmware Upgrades
Readers of our blog know we’re heavy Maretron users and big fans. The products are well-priced and easy-to-use, with great customer service. Read more about our Maretron usage at Maretron N2KView on Dirona. Firmware upgrades to any company’s devices are always risky, so we typically try to avoid them. But firmware upgrades sometimes are necessary,…
METS 2019
METS (Marine Equipment Trade Show), held annually in Amsterdam over three days, is the world’s largest boats and marine equipment trade show. This year’s attendance reached 17,792, with 1,670 exhibitors from around the globe. Exhibitors range from superyacht builders and marine yards, to yacht designers, to engineering and composite products companies, to manufacturers of anything…
Kar-Tech Mini Guider Proportional Calibration
The Kar-Tech Mini Guider is a good wireless remote control for the Steelhead ES-series of cranes including the ES-1000 and ES-1500. It’s easy to use and works quite well. For install instructions, see Steelhead Wireless Remote. Part of the installation is configuring proportional control, and the Kar-Tech instructions are a bit opaque. But once calibrated,…
Amsterdam First Two Weeks
During our first two weeks in Amsterdam, we enjoyed being back in familiar territory with the city already lit up for the winter. We revisited some of our favourite restaurants, found some new ones, and stocked up on supplies and parts from known vendors. We also completed a fair number of larger boat projects, including…
Return to Amsterdam
We normally prefer not to return to the same location, particularly for a long-term stay. But in looking at stop-overs for this winter, where we would make a couple of return trips to the US, we couldn’t find anything that came even close to Amsterdam in terms of marina location, restaurant and entertainment choices, and…
GOODBYE TO ENVOY
We’re home in Auckland and Envoy is in Greece’s Lefkada marina.
Our involvement with Envoy is over as she’s now under the control of her new Australian owners, Larry and Catherine.
We’ve been looking at buying a new (pre-owned) boat and have taken one to survey stage, so if we proceed with this boat I’ll give more details next week.
It’s early October and we’re back in Lefkada marina with my brother Charles aboard. It’s fitting that he’s with us for our final days aboard Envoy as he’s the reason we’re here. In the early 2000s Charles and his French wife Marie sailed their 34ft yacht Acrobat from Brisbane to Turkey and invited us to join them there in 2004 for a couple of weeks cruising. It was during that time Diane and I decided to do this Med cruising.
We came into the marina two days early because a “destructive thunderstorm” was forecast and we didn’t want to take any chances – we’ve seen what they can do! However despite our caution this time the storm doesn’t materialise.
The day before we come to the marina the generator fails to start – it turns over OK and runs provided the glow plug pre-heat switch is kept activated but stops when this switch is let go.
Charles and I check it over and change a few relays to no avail.
Sailand’s electrician Velissaris comes aboard and when we explain the issue he nods his head knowingly, saying that probably the oil or coolant level is too low. I’m skeptical as I’d checked the coolant level the same day, however we check it again and find it’s slightly low. We add coolant then lo and behold all is good.
Charles and I check it over and change a few relays to no avail.
Sailand’s electrician Velissaris comes aboard and when we explain the issue he nods his head knowingly, saying that probably the oil or coolant level is too low. I’m skeptical as I’d checked the coolant level the same day, however we check it again and find it’s slightly low. We add coolant then lo and behold all is good.
The generator has always needed a very small amount of coolant added every couple of weeks, however we ask Velissaris to check the generator’s cooling system during winter and the exhaust system while they’re at it.
We have six days before catching the bus to Athens and this is plenty of time to prepare Envoy for winter. Our final short cruise is from our marina berth to the haul-out area – how many times we’ve stood by watching Envoy being pulled out or launched!
We watch Envoy being positioned on the hard stand for our final time
We watch Envoy being positioned on the hard stand for our final time
Maybe this will be our next boat?
This year’s cruise has been great and we’ve enjoyed sharing it with Chris, Larry and Catherine and Charles. We’ve visited Greece, Albania and Italy and cruised 964 miles.
We recall some of the challenges we had making this an interesting cruise: a leaking bilge that took Sailand about a week to permanently repair, the major storm in the marina at Taranto, a large motor vessel hitting us in the marina at Gallipoli, getting our anchor stuck in a bay in Italy, a storm in Ay Eufemia harbour with other boats adrift, being detained by Coastguard for a week after our EPIRB inadvertently activated, losing and then finding our RHIB in Albania and being anchored in Vlikho Bay when an adrift yacht nearly hit us. All good fun!
We recall some of the challenges we had making this an interesting cruise: a leaking bilge that took Sailand about a week to permanently repair, the major storm in the marina at Taranto, a large motor vessel hitting us in the marina at Gallipoli, getting our anchor stuck in a bay in Italy, a storm in Ay Eufemia harbour with other boats adrift, being detained by Coastguard for a week after our EPIRB inadvertently activated, losing and then finding our RHIB in Albania and being anchored in Vlikho Bay when an adrift yacht nearly hit us. All good fun!
So folks I see that our first post was in late 2006, so after 13 years that’s the end of the Envoy Blog, although I will post a bit more material here, particularly regarding our new vessel.
Envoy was perfect for this Med adventure, but our next boat will be somewhat different!
Thanks for following us.
Envoy was perfect for this Med adventure, but our next boat will be somewhat different!
Thanks for following us.
